Adygil Bank Sinker Mold with 5 Cavities and 4,8,12-Ounce

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould. 5. Using the tongs grab tour mould carefully and have the pouring cavity facing you. 6. Pour molten lead into mould until cavity is full. 7. It is recommended the mould be preheated before use. 8. Once mould has been heated up and your lesd is fully molten and clean you can proceed to pour the lead in to the cavity. 9. Wait 10 seconds and using pliers pull wire out then proceed to open mould. 10. Using your pliers snip the excess lead of the top of the sinkers. 11. Good luck and remember to always take care. 12.When disposing of unwanted lead please take note of your local authority about appropriate methods. Warning: 1. Lead is a toxic material 2. Use PPE when handing moulds 3. Use dry moulds as water can cause molten lead to explode

• Multi-Cavity Design: Features 5 separate cavities that allow you to create multiple bank sinkers in different weights including 4, 8, and 12-ounce options, maximizing your efficiency when crafting fishing weights for various water conditions and fishing techniques
• Durable Construction: Made from high-quality materials designed to withstand repeated exposure to molten lead at temperatures up to 650 degrees Fahrenheit, ensuring consistent sinker production and long-lasting performance for your tackle-making needs
• Versatile Sinker Creation: Accommodates wire insertion for creating sinkers with center holes, giving you the flexibility to produce both solid bank sinkers and those with attachment points for various fishing rig configurations
• Easy Release System: Engineered with a user-friendly mold design that allows for quick opening and simple sinker removal after the lead has cooled, streamlining your sinker-making process and reducing production time
• Complete Instructions Included: Comes with detailed step-by-step guidance on proper lead melting, pouring techniques, mold preheating, and essential safety precautions to help you create professional-quality fishing sinkers while maintaining safe handling practices