JVCC Vinyl Electroplating Tape (VEPT-65): 1 in. x 36 yds. (Yellow)

<p><b>JVCC VEPT-65 Vinyl Electroplating Tape</b> is a soft polyvinyl chloride (SPVC) film masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process. In addition, VEPT-65 can be used as a protection tape for shot peening applications.</p> <p>JVCC VEPT-65 Vinyl Electroplating tape is extremely conformable and durable for even the most difficult shapes and applications. VEPT-65 is highly resistant to oil, acids, alkalines and corrosive chemicals making this tape an ideal choice for challenging industrial applications. JVCC VEPT-65 Vinyl Electroplating Tape has excellent adhesion to metals and plastics.</p> NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 25mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.<br><br><b>Technical Information</b><br>- Core: 3 inch diameter <br>- Backing/Carrier: soft polyvinyl chloride (SPVC) film <br>- Adhesive: rubber <br>- Thickness: 6.8 mils (carrier, adhesive) <br>- Adhesion: 17 ounces per inch (to stainless steel test panel) <br>- Tensile Strength: 16 pounds per inch (longitudinal) <br>- Service/Operating Temperature: up to 194F <br>- Elongation: 100 % <br>

• JVCC VEPT-65 Vinyl Electroplating Tape is a soft polyvinyl chloride (SPVC) film masking tape designed for use with PCB terminal zone contacts to prevent penetration of chemicals during the plating process. In addition, VEPT-65 can be used as a protection tape for shot peening applications.
• JVCC VEPT-65 Vinyl Electroplating Tape has excellent adhesion to metals and plastics. JVCC VEPT-65 Vinyl Electroplating tape is extremely conformable and durable for even the most difficult shapes and applications.
• VEPT-65 is highly resistant to oil, acids, alkalines and corrosive chemicals making this tape an ideal choice for challenging industrial applications.
• Features and benefits of JVCC VEPT-65 Vinyl Electroplating Tape include conforms to irregular shapes, dependable performance in mechanical and industrial environments, excellent bond to metal and plastic surfaces, oil, acid, alkaline, and corrosive chemical resistant, and more.
• Carrier/Backing: soft polyvinyl chloride (SPVC) film. Adhesive: rubber. Thickness: 6.8 mils (carrier, adhesive). Adhesion: 17 ounces per inch (to stainless steel test panel). Tensile Strength: 16 pounds per inch (longitudinal). Service/Operating Temperature: up to 194F. Elongation: 100%. Core: 3-inch diameter.